Calculus How To

Riemann Sums: Left, Right, Trapezoid, Midpoint, Simpson’s

Share on


Riemann Sums Contents (click on a topic to go to that section):

Riemann Sums Definition

A Riemann sum is a way to approximate the area under a curve using a series of rectangles; These rectangles represent pieces of the curve called subintervals (sometimes called subdivisions or partitions). Different types of sums (left, right, trapezoid, midpoint, Simpson’s rule) use the rectangles in slightly different ways.

1. Left-Hand Riemann Sums

With the left-hand sum, the upper-left corner of each rectangle touches the curve.

left hand Riemann sums.

A left hand Riemann sum.



The left-hand rule gives an underestimate of the actual area.
Back to Top

Watch the video for a simple example of left and right hand sums:

2. Right-Hand Riemann Sums

The right-hand Riemann sum approximates the area using the right endpoints of each subinterval.
With the right-hand sum, each rectangle is drawn so that the upper-right corner touches the curve.

right hand Riemann sums.

A right hand Riemann sum.


The right-hand rule gives an overestimate of the actual area.
Back to Top

3. Trapezoid Rule

The trapezoid rule uses an average of the left- and right-hand values. While the left-hand rule, the right-hand rule and the midpoint rule use rectangles, The trapezoid rule uses trapezoids.
The trapezoids hug the curve better than left- or right- hand rule rectangles and so gives you a better estimate of the area.

Trapezoid sum.

Trapezoid Riemann sum.




Back to Top

4. Midpoint Rule

The midpoint rule uses the midpoint of the rectangles for the estimate. A midpoint rule is a much better estimate of the area under the curve than either a left- or right- sum. As a rule of thumb, midpoint sums are twice as good than trapezoid estimates.

Midpoint Riemann sum.

Midpoint Riemann sum.




Click here for Midpoint Example

Back to Top

5. Simpson’s Rule

Simpson’s rule uses parabolas and is an extremely accurate approximation method. It will give the exact area for any polynomial of third degree or less.

Simpson’s rule uses a combination of the midpoint rules and trapezoid rules, so if you have already calculated the midpoint (M) and trapezoid (T) areas, it’s a simple way to get a more accurate approximation.


The subscript 2n in the equation means that if you use M1 and T1, you get S2, if you use M2 and T2, you get S4.

S2n = (Mn+Mn+Tn) ⁄ 3

Riemann sum, Simpson's.

Riemann sum, Simpson’s.




Back to Top

Example Problem (Right Hand Riemann)

Example problem: Find the area under the curve from x = 0 to x = 2 for the function x3 using the right endpoint rule.

Step 1: Sketch the graph:
graph-of-x^31

Step 2: Draw a series of rectangles under the curve, from the x-axis to the curve. We’ll use four rectangles for this example, but this number is arbitrary (you can use as few, or as many, as you like). The question asks for the right endpoint rule, so draw your rectangles using points furthest to the right. Place your pen on the endpoint (the first endpoint to the right is 0.5), draw up to the curve and then draw left to the y-axis to form a rectangle.
right hand

Step 3: Calculate the area of each rectangle by multiplying the height by the width.

Interval 0 to 0.5 0.5 to 1 1 to 1.5 1.5 to 2
Height 0.125 1 3.375 8
Width .5 .5 .5 .5
W * H .0625 .5 1.6875 4

Step 4: Add all of the rectangle’s areas together to find the area under the curve: .0625 + .5 + 1.6875 + 4 = 6.25
That’s it!


Tip:The number of rectangles is arbitrary—you can use as many, or as few, as you want. However, the more rectangles you use, the better the approximation will be to the actual area.
Back to Top

Example 2: Midpoint Riemann Sum

Example question: Calculate a Riemann sum for
f(x) = x2 + 2 on the interval [2,4] using n = 8 rectangles and the midpoint rule.

Step 1: Divide the interval into segments. For this example problem, divide the x-axis into 8 intervals.

Step 2: Find the midpoints of those segments. The midpoints for the segments (in red on the picture below) are: 2.125, 2.375, 2.625, 2.875, 3.125, 3.375, 3.625, and 3.875. These will be your inputs (x-values) for the Riemann sum.
riemann-sum-interval-midpoints-300x105


Step 3: Plug the midpoints into the function, and then multiply by the interval length, which is 0.25:
f(2.125)0.25 + f(2.375)0.25 + f(2.625)0.25 + f(2.875)0.25 + f(3.125)0.25 + f(3.375)0.25 + f(3.625)0.25 + f(3.875)0.25
Using algebra to rewrite:
= [f(2.125) + f(2.375) + f(2.625) + f(2.875) + f(3.125) + f(3.375) + f(3.625) + f(3.875)]0.25
Plugging the function’s values into the equation:
= [6.515625 + 7.640625 + 8.890625 + 10.265625 + 11.765625 + 13.390625 + 15.140625 + 17.015625]0.25
= 90.625(0.25) = 22.65625

The midpoint came pretty close to the actual integral (22.6666).

That’s it!

Back to Top

CITE THIS AS:
Stephanie Glen. "Riemann Sums: Left, Right, Trapezoid, Midpoint, Simpson’s" From CalculusHowTo.com: Calculus for the rest of us! https://www.calculushowto.com/problem-solving/riemann-sums/
------------------------------------------------------------------------------

Need help with a homework or test question? With Chegg Study, you can get step-by-step solutions to your questions from an expert in the field. Your first 30 minutes with a Chegg tutor is free!